LS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above LS-6 support.
Other constant and variable speeds from 25 to 90 FPM. NOTE: Capacity and accumulation feature affected with speed change.
Fixed ends stops, blade, roller or pin type stops available.
Continuous adjustable channel, fixed channel or type A & B angle. See Accessory section. NOTE: If product comes in contact with guard rails, product flow will be affected. Fixed channel overlapping, one direction. Fixed channel nonoverlapping, reversing.
36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied.
Energy efficient, single phase, other characteristics. 3/4 HP maximum.
Many common electrical controls are available. These items include: One direction manual start switch, reverse drum switch, non-reversing and reversible magnetic starters, push button stations, AC variable frequency drives. Look for these components in the ELECTRICAL Category.