MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support.
Other constant and variable speeds from 25 to 120 FPM. NOTE: Capacity affected with speed change.
Continuous adjustable channel, fixed channel, type A or B angle. NOTE: If product comes in contact with guard rails, product flow will be affected.
36 in. to 120 in. support heights in 6 in. increments . Knee braces supplied.
5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available.
Standard drive may be omitted and curve slave driven from 190-ACC, 190-ACZ, or 190-LR conveyors.. (Specify by sketch, location of slave connection). Minimum elevation 11 in.
Energy efficient, single phase, other characteristics. 3/4 HP maximum.
Many common electrical controls are available. These items include: One direction manual start switch, reverse drum switch, non-reversing and reversible magnetic starters, push button stations, AC variable frequency drives. Look for these components in the ELECTRICAL Category..