MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support.
Other constant and variable speeds available. V-belt drive supplied on speeds under 17 FPM. Capacity affected with speed change.
Provides 16 in. of belt take-up. Minimum elevation 16 in. with 4 in. drive, 17 in. with 8 in. drive. Specify location. Minimum OAL without modification–63 in. with 4 in. drive, 66 in. with 8 in. drive
Hand operated blade or roller, air operated blade or roller, angle and raised roller end stops.
36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied.
Continuous adjustable channel, fixed channel or type A angle, elevated to allow for pop-out tread rollers. Fixed channel overlapping, one direction. Fixed channel non-overlapping, reversing with channels raised with spacers to allow for pop-out tread rollers.
5/8 in. dia. x 8 ft. long unplated rods fully threaded.
Other lengths and galvanized rods available.
Energy efficient, single phase other characteristics. 2 HP maximum.
Many common electrical controls are available. These items include: One direction manual start switch, reverse drum switch, non-reversing and reversible magnetic starters, push button stations, AC variable frequency drives. Look for these components in the ELECTRICAL Category.