Model RBI "Floor to Floor" Incline Conveyor (Roller Bed)
BELT - Black Trackmate 447 Roughtop with PVC cover. Clipper unibar lacing.
BED - Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 6 in. Mounted in 6-1/2 in. x 12 ga. powder painted, formed steel channel frame. Standard 4 ft., 6 ft., 8 ft., and 10 ft. long sections bolt together with splice plates.
DOUBLE NOSE-OVER - A 26 in. long horizontal and a 12 in. long nose-over section provides a two-step transition of product from incline to horizontal. Provides up to 30° incline adjustment.
LOWER POWERED FEEDER - Chain type driven from tail pulley of inclined conveyor. Supports not included in base price.
CENTER DRIVE - Located on the incline section. Chain guard located on left hand side.
DRIVE PULLEY - 8 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned and fully lagged.
TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings or 6 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned.
TAKE-UP PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings or 6 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned.
TAKE-UP - Take-ups in center drive provides 16 in. of belt take-up.
SNUB IDLER/NOSE-OVER ROLLERS - Adjustable 2-1/8 in. dia. or 2-1/2 in. dia. pre-lubricated ball bearings. Snub guards included.
RETURN IDLER - Adjustable 1.9 in. dia., pre-lubricated ball bearings.
BEARINGS - Sealed, pre-lubricated, self-aligning, ball bearings on drive, tail and take-up pulley.