Store Front  »  Belt Conveyor  »  Model TL  »  Specifications

Model TL Horizontal Belt Conveyor

Overall View
Overall View
SECTION "X-X"

Section "X-X"


BELT - Ultimate 140 BOS-Nitrile, impregnated belt with one side brushed.

BED - 6-5/8 in. deep x 12 ga. formed steel slider bed powder painted. Reinforced with 3/4 in. pipe which forms sockets for guard rails. Standard 5 ft. & 10 ft. long sections bolt together with splice plates. 48 in. and 51 in. bed widths are available in 5 ft. lengths only.

END DRIVE - Located on discharge end of conveyor, chain guard on left hand side.

DRIVE PULLEY - 8 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned and fully lagged.

TAIL PULLEY - 6 in. dia. with1-3/16 in. dia. shaft at bearings, machine crowned.

SNUB IDLER - Adjustable 2-1/8 in. dia. for tail end 2-1/2 in. dia. for drive end. Pre-lubricated ball bearings. Guards included.

RETURN IDLER - Adjustable 1.9 in. dia. pre-lubricated ball bearings.

TAKE-UP - Take-ups at tail pulley. Provides 4 in. of belt take-up.

BEARINGS - Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys.

SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley.

MOTOR - 1 HP-230/460V-3 Ph.-60 Hz. Totally Enclosed C-Face.

BELT SPEED - Constant 65 FPM.

CAPACITY - Maximum load per linear foot of conveyor 100 lbs. NOT TO EXCEED capacity in charts.

FLOOR SUPPORTS - Now supplied as optional equipment.


8" DIA. DRIVE PULLEY LIVE LOAD CAPACITY @ 65 FPM
HP BELT
WIDTHS
TO
LENGTHS UP TO
52' 102'
DISTRIBUTED LOAD (LBS.)
1/2 24" - 30"
36" - 42"
48"
240
180
130
160
60
0
1 24" - 30"
36" - 42"
48"
610
550
490
530
430
330
2 24" - 30"
36" - 42"
48"
1340
1290
1230
1260
1160
1070