BELT–Ultimate 140 BOS–Nitrile, impregnated belt with one side brushed.
BED–Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 6 in. Mounted in 6-1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with splice plates.
CROSS BRACING–Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure correct product tracking. Supplied on every other section, 30 ft. bed lengths and over.
CENTER DRIVE–Minimum elevation–19-1/2 in. Can be placed on any section of conveyor length. Minimum OAL without modification 120 in. Chain guard located on left hand side.
DRIVE PULLEY–8 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned and fully lagged.
TAIL PULLEY–4 in. dia. with 1 in. dia. shaft at bearings or 6 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned.
SNUB IDLER–Adjustable 2-1/8 in. dia. pre-lubricated ball bearings. Guards included.
RETURN IDLER–Adjustable 1.9 in. dia. pre-lubricated ball bearings.
TAKE-UP–Take-ups in center drive provides 16 in. of belt take-up.
BEARINGS–Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys. Pre-lubricated ball bearings in tread rollers.