Store Front  »  Belt Conveyor  »  Model SB  »  Options

Model SB Horizontal Belt Conveyor (Slider Bed)

FLOOR SUPPORTS Help
MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support.
BELT * Help
Black or white Polymate 100 RMP-COS (cover one side), Black Trackmate 447 Roughtop with PVC cover, Black Trackmate 533 COS-PVC, Tan Glidetop.
BELT SPEED * Help
Other constant and variable speeds. V-belt drive supplied on speeds under 17 FPM.
GUARD RAILS Help
Continuous adjustable channel, fixed channel, type A & B angle. Fixed Channel overlapping, one direction. Fixed Channel non-overlapping, reversing. 
CASTERS Help
Support casters are available in 4 In. or 6 In. diameter. Casters are available in with Steel or Rubber wheels and can be supplied with wheel brakes.
POLY-TIER SUPPORTS Help
36 in. to 120 in. support heights in 6 in.
increments. Knee braces supplied.
CEILING HANGERS Help
5/8 in. dia. x 8 ft. long unplated rods fully
threaded. Other lengths and galvanized rods available.
MOTORS Help
Energy efficient, single phase, other characteristics. 2 HP maximum.
ELECTRICAL CONTROLS Help
Many common electrical controls are available. These items include: One direction manual start switch, reverse drum switch, non-reversing and reversible magnetic starters, push button stations, AC variable frequency drives. Look for these components in the ELECTRICAL Category.
* NOTE: Capacity affected with these options.