Model 25SR / 25SRC 2.5 in. x 11 Ga. Gravity Roller Conveyor
4 in. x 5.4 lb powder painted structural steel channel with bolt-in cross members set high, welded cross members set low.
MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support.
Continuous adjustable channel, solid side guards, PC side guards with formed top. Fixed Channel overlapping, one direction (use with systems ends only). Fixed Channel non-overlapping, reversing (use with system ends only).
Support casters are available in 4 in. or 6 in. diameter. Casters are available with Steel or Rubber wheels and can be supplied with wheel brakes.
36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied.
5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available.