Store Front  »  Gravity Conveyor  »  Heavy Duty  »  25SR / 25SRC  »  Specifications

Model 25SR / 25SRC 2.5 in. x 11 Ga. Gravity Roller Conveyor

SET HIGH
Set High
SET LOW (13" - 27" BR)

 SET LOW (13" - 27" BR)

SET LOW
Frame spacer 1-1/2" below channel on 31" - 51" BR only

 Set Low (Frame spacer 1-1/2 in. below channel on 31 in. - 51 in. BR only)

RADIUS

 Radius


Width - Between Rail Width: 13 in., 15 in., 17 in., 19 in., 21 in., 23 in., 25 in., 27 in., 31 in., 33 in., 37 in., 39 in., 43 in., 47 in., 51 in., and 55 in.
Frame - 4 in. deep x 1-5/8 in. flange x 4 ga. powder painted formed steel channel with bolt-in cross members set high, welded cross members set low.
Butt Couplings - For bolting sections together.
Curves - 30°, 45°, 60° and 90° with 32-1/2 in. inside radius for widths up to 27 in., 48 in. inside radius for 31 in. to 39 in. between rail widths.
Straight Section Rollers - 2-1/2 in. dia. x 11 ga. steel tubing. Bearings are labyrinth sealed and grease packed.
Curved Section Rollers - 2-1/2 in. dia. x 11 ga. unplated steel tubing. Bearings are labyrinth sealed and grease packed.
Axles - 11/16 in. hex shaft, spring loaded.
Capacity - See Load Capacity Chart below.


LOAD CAPACITY CHART

Support Centers Frame Capacity (Lbs.) Roller Capacity (Lbs.)
Max. Load Per Roller
Maximum Distributed Live Load Per Foot 13" to 39" BR 43" to 51" BR
2-1/2" 2-1/2"
5'

 1620

630 630
10'

  288