Store Front  »  Gravity Conveyor  »  Light Duty  »  SW / SWC  »  Specifications

Model SW / SWC Steel Gravity Skatewheel Conveyor (Straight & Curved)

3" AXLE CENTER

3" Axle Center 

STRAIGHT SECTION OVERALL LENGTH
Straight Section Overall Length
CURVED SECTION RADIUS
Curved Section Radius

Width - 12 in., 15 in., 18 in., and 24 in. overall.
Frame - 2-1/2 in. deep x 1 in. flange x 12 ga. powder painted formed steel.
Couplings - Straight sections have bolts on one end, hooks on opposite end. Curved sections have gravity hooks on both ends.
Straight Section Lengths - 5 ft. & 10 ft. straight sections.
Curves - Curves have 48 in. outside radius on 12 in., 15 in., 18 in. widths and 60 in. outside radius on 24 in. width.
Wheels - 1-15/16 in. O.D. ball bearings run in hardened raceway with life-time lubrication. Zinc-coated steel.
Axles - 1/4 in. dia., threaded one end with locknut. Spaced on 3 in. or 4 in. centers, specify.
Capacity - See Load Capacity Chart below.

 

LOAD CAPACITY CHART

Frame Material Support Centers Frame Capacity (Lbs.) Roller Capacity (Lbs.)
Maximum Distributed Live Load Per Foot Maximum Load Per Roller
Steel

  5'
10'

270
38

45

CURVE INSIDE RADIUS

Overall Width Inside Radius
12" 36"
15" 33"
18" 30"

24"

36"